Manufacture of pieces by injection
We manufacture the pieces of plastic to the measure and requirements of our clients. We also incorporate the plastic pieces into the final product of the customer and apply the necessary finishes to the pieces.
The plastic pieces we manufacture by injection, we manufacture the pieces under the plane so that they are all customized pieces tailored to our customers. We use any thermoplastic that our customers require.
The series we make are the ones the customer needs. We apply the necessary finishes to the pieces, like tampograficos and we can mechanize or assemble sets of pieces to the final product.
For pieces with special characteristics, we work with the necessary materials and additives in each case. We can also mechanize or assemble assemblies to the customer’s final product.
Plastic materials for the manufacture of pieces by injection
We manufacture plastic pieces with most of the thermoplastics available in the market, depending on the use or destination of the final piece. If you do not know which material is most suitable for the manufacture of your piece, we advise you. The most used materials are Polyamide (PA), Polycarbonate (PC), Acetalic POM Resin, Polypropylene (PP), Acrylonitrile – Butadiene – Styrene (ABS), these materials also be compounded with fillers, such as glass fiber, molybdenum disulfide, or mineral fibers. We also use other thermoplastics such as high- or low-density polyethylene, and polystyrene (PS)..
Main characteristics of plastics:
Manufacturing of pieces of Polyamide (PA)
– They are used for the manufacture of parts resistant to high or low temperatures. – They have good mechanical properties, resisting impacts or friction to chemicals. – They color easily. – Its properties can be improved by adding additives and filler.
Manufacture of plastic pieces in Polycarbonates (PC)
– They are resistant to impacts, have good mechanical properties. – They are dimensionally stable. – Aesthetically good finishes. – They can be mixed with ABS to obtain brightly colored pieces that are both attractive and resistant.
Manufacture of pieces of Acetal Resin (POM)
– Very resistant to rubbing, so it is suitable for those parts that are in movement. – Stability over a wide temperature range.
Manufacture of pieces of Polypropylene (PP)
– Good impact resistance. – Ease of transformation. – Good aspect.
Manufacture of pieces of Poly Acrylonitrile – Butadiene – Styrene (ABS)
Resistance to impacts. – Good finish of the pieces. – If the mold is well polished, the pieces have a lot of brightness and the colors can have very attractive tones. – The pieces can be chromed.